RecSound is a Windows application designed for recording sound from various
audio sources:
telephone lines (with adapter)
radio receivers
microphones
One line input of sound card gives two recording channels (left and right channels of stereo input).
Actually RecSound consists of two applications: the "RecSound core" and the "Control" application. RecSound core doesn't have any user interface, total control of recording system is provided by control application. RecSound core can be installed as Windows service or set to auto loading in application mode after Windows startup. Control application can be started anytime to listen audio records or change application settings. It doesn't work without RecSound core is started.
Main features of RecSound are:
Auto recording on:
1. audio level in recording channel becomes above the trigger level;
2. audio level in recording channel becomes below the trigger level;
3. voice presence;
4. by schedule (can be on one day or on week);
(Combination of auto recording modes, enumerated above, is possible. In this case record turns on by logical OR rule).
realtime monitoring of audio signal in recording channel (user can hear recording sound), with possibility of automatic gain control (AGC), denoising and spectrum inversion;
Decoding phone line signaling:
DTMF tones
Caller ID
so-called Automatic Number Detector (using in former USSR countries);
Fax messages decoding;
Popularity :
Rating :
